Ultra sensitive microphone and amplifier give full range of sounds needed by the professional
Quickly pinpoints noise and location of bad bearings, bushings, dirty fuel injectors, wind & air leaks, noisy valves & lifters.
Non-conductive coating will not bother expensive computer circuitry
Limited distortion of unwanted sounds
7-sound level control settings, 60db to 120 db, adds clarity to all types of noises
db meter, monitor
Flexible shaft reaches tight areas
High-low volume control
Battery check position on control switch
Includes ABS carrying/storage case
SAVE TIME TROUBLE-SHOOTING
EngineEAR II is an advanced electronic stethoscope which dramatically outperforms and replaces the ordinary mechanic's stethoscope, and offers much more versatility to automotive, industrial and HVAC service technicians.
This time saving product is used to detect bad bearings, bushings, noisy lifters, exhaust manifold leaks, broken or chipped gear teeth. It is also used to pinpoint the location of wind and water leaks around doors, windows, and sunroofs.
Simply place the sensing tip on the suspect part, place the professional headphones over both ears (blocks surrounding noise), turn on unit, adjust the volume control, db sound level and listen to what's going on.
A new level of problem solving... The EngineEAR II with the 7-sound levels enables the operator to select the correct frequency from 60dB to 1200dB, thus adding clarity to all types of noises.
The new inductive Metal Probe quickly fits over the EngineEAR II microphone and is perfect when you need a longer reach, or are working around very hot surfaces. It senses the faintest vibrations and transmits very clear sounds to the headphones through our extraordinary amplifier.
